Equipment Parts Hotline: Buda (888) 643-2372 | Kansas (800) 252-6618

Water Trucks

niece water trucksBuilt To Work

On the road or at the jobsite, you need a partner you can trust. You can count on a Niece Water Truck to get the job done every day. Our custom built water trucks mean you get a workhorse ready to take on any job. All Niece water trucks include innovative Niece Engineering, American made components, and quality manufacturing.

Our water trucks are extremely versatile because...

Niece Rigid Frame tanks can be made from 8,000 gallons (36,367 L) to 45,000 gallons (204,574 L). The specifications below indicate features on a 12,500 gallon (36,367 L) tank. All tanks will be equipped with 6X5 pumps. Actuation is determined by the type of truck and / or customer preference.
learn more

Our water trucks are extremely versatile because...

Niece Rigid Frame tanks can be made from 8,000 gallons (36,367 L) to 45,000 gallons (204,574 L). The specifications below indicate features on a 12,500 gallon (36,367 L) tank. All tanks will be equipped with 6X5 pumps. Actuation is determined by the type of truck and / or customer preference.
learn more

Our Trucks Feature The following Unique Design Elements

Additional 1,000 gallons can be added to tank size if using the Long Wheel Base models offered by the manufacturer. 5,000 gallon tanks will be equipped with 4X4 pumps and all tanks above that size will have 6X5 pumps. Tank Kits are also available for dealer installation.
learn more

General Specifications:

  • Low profile, semi-elliptical, flat sided dual radius.
  • Interlocked bulkheads welded 100% inside and outside.
  • Minimum ¼” (6.35mm) side skins, top, baffles,and bulkheads.
  • Surge reverse baffling with key locked baffles both transverse and longitudinal.
  • 24” (60.96cm) man-way system.
  • Access cover for clean out and inspection, bottom rear location.
  • Front and Rear drive tire mud flaps.
  • Tire area coated with poly-coat for corrosion protection.

 

  • Rock ejector mounts, customer supplied ejectors.
  • Fill-port -36” (91.44cm) manhole w/ back-flush baffle, trash screen included.
  • 3” (7.62cm) Ground Fill at rear of tank.
  • Lights: Sealed LED 24 volt, red tail, amber turn, and red stop with loom guarding.
  • Work Lights: (2) each, rear facing, cab panel control.
  • Front bulkhead ladder with safety nonskid to manhole.
  • Access ports mounted midline between each transverse baffle.
  • Pin on mounting.

 

  • Customer furnished hoist cylinder, cylinder and body pins.
  • Controls: Spray system air controlled panel for installation in operator’s compartment.
  • Low water warning light on driver panel.
  • Low water drain system, ground access, at rear of tank.
  • Rear 2” drain to empty tank.
  • Interior cleaned and painted with marine grade epoxy primer.
  • Exterior commercial grade cleaned, primed, and top coated with hardener based cat yellow enamel.

Other Featured Niece Equipment